Hampshire · Permeable paving

Permeable block paving in Fleet

Our permeable block paving service covers Fleet and nearby Farnborough, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes GU51, GU13, GU52
  • £115–£185 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Permeable block paving in Fleet: the local picture

Homes in Fleet include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Planning-sensitive towns and conservation areas are common in the South East, so we check the front-garden rules before quoting.

How much does a permeable block drive cost in Fleet?

Guide price in Fleet£115–£185 per m²Including VAT at 20%

Expect permeable block drives in Fleet to come in at around £115–£185 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £5,650 and £9,200.

ItemGuide price inc VAT
Permeable block paving driveway£115–£185 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our permeable paving service

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Grit laying course and permeable blocks with grit-filled joints
  • Deeper dig-out for the open-graded sub-base
  • Ground check: how well the soil drains and how high the water table sits
  • Edge restraints and any overflow or outlet the design needs
  • Geotextile layer where the design needs one

Before we price your permeable block drive

  • Where rain will go: falls, lawn, border, channel or soakaway
  • Where an electric vehicle charger cable might run
  • Existing manhole and inspection covers, and whether to recess them
  • Ground conditions under the old surface and how deep the sub-base must be
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Rules for front drives in Fleet

Fleet is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Permeable paving in Fleet: questions

Do I need planning permission for a permeable block drive in Fleet?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

How much does a permeable block drive cost in Fleet?

Our guide for Fleet is £115–£185 per m² including VAT, so a 50 m² drive is usually about £5,650–£9,200. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Fleet?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Permeable paving near Fleet

Nearby towns we cover for permeable paving, and permeable paving across Hampshire:

Other block paving services in Fleet

Or see all block paving services in Fleet.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Fleet, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote