Greater Manchester · Permeable paving

Permeable block paving in Salford

From M6, M5, M7 to the villages around Salford, we quote permeable block drives built to one written specification, so you know exactly what is going under the blocks.

  • Postcodes M6, M5, M7
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

What to know before a permeable block drive in Salford

Across Salford, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a permeable block drive cost in Salford?

Guide price in Salford£105–£170 per m²Including VAT at 20%

In the North West, a permeable block drive usually costs £105–£170 per m² including VAT. For a 50 m² drive, that is roughly £5,250–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Geotextile layer where the design needs one
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Deeper dig-out for the open-graded sub-base
  • Ground check: how well the soil drains and how high the water table sits
  • Grit laying course and permeable blocks with grit-filled joints

What the survey covers

  • Ground conditions under the old surface and how deep the sub-base must be
  • The kerb: is it already dropped, and is it wide enough?
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Steps, thresholds and door heights
  • Block range, thickness, colour and pattern to suit the house

Rules for front drives in Salford

Salford is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Permeable paving in Salford: questions

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

How much does a permeable block drive cost in Salford?

Our guide for Salford is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.

Is the survey in Salford free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Permeable paving near Salford

Nearby towns we cover for permeable paving, and permeable paving across Greater Manchester:

Other block paving services in Salford

Or see all block paving services in Salford.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote