Greater London · Permeable paving

Permeable block paving in Wimbledon

Thinking about permeable block drives in Wimbledon? We survey, specify and build them for homeowners across Wimbledon and the surrounding SW postcodes, with the dig depth, sub-base, edging and drainage written into your quote.

  • Postcodes SW19, SW20
  • £125–£205 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Planning a permeable block drive in Wimbledon

Across Wimbledon, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

Many London streets have controlled parking and narrow frontages, so we measure the car space and the crossover before anything else.

How much does a permeable block drive cost in Wimbledon?

Guide price in Wimbledon£125–£205 per m²Including VAT at 20%

In London, a permeable block drive usually costs £125–£205 per m² including VAT. For a 50 m² drive, that is roughly £6,300–£10,200. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Permeable block paving driveway£125–£205 per m²
Breaking out an old surface£12–£50 per m²
Edging or kerb, bedded and haunched£25–£60 per metre
Typical channel drain run£420–£1,200
Dropped kerb (vehicle crossover) construction£1,200–£3,600

Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Edge restraints and any overflow or outlet the design needs
  • Grit laying course and permeable blocks with grit-filled joints
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Deeper dig-out for the open-graded sub-base
  • Geotextile layer where the design needs one

What we check on a Wimbledon survey

  • Where an electric vehicle charger cable might run
  • Trees and roots near the drive
  • Block range, thickness, colour and pattern to suit the house
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Edges against lawns, beds, walls and neighbours

Rules for front drives in Wimbledon

Wimbledon is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Permeable paving in Wimbledon: questions

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a permeable block drive in Wimbledon?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Is the survey in Wimbledon free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

Do you cover Morden, Mitcham and Putney?

Yes. We cover Wimbledon and the places around it, including Morden, Mitcham and Putney, and the rest of Greater London.

Permeable paving near Wimbledon

Nearby towns we cover for permeable paving, and permeable paving across Greater London:

Other block paving services in Wimbledon

Or see all block paving services in Wimbledon.

Next step

Get a guide price in two minutes

Ready to talk about your permeable block drive? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote