Permeable block paving in Southall: the local picture
Southall has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a permeable block drive cost in Southall?
For Southall, our guide is £125–£205 per m² including VAT, so a 50 m² drive is likely to be £6,300–£10,200. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £125–£205 per m² |
| Breaking out an old surface | £12–£50 per m² |
| Edging or kerb, bedded and haunched | £25–£60 per metre |
| Typical channel drain run | £420–£1,200 |
| Dropped kerb (vehicle crossover) construction | £1,200–£3,600 |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Open-graded crushed stone (no fines) laid and compacted in layers
- Geotextile layer where the design needs one
- Edge restraints and any overflow or outlet the design needs
- Grit laying course and permeable blocks with grit-filled joints
- Deeper dig-out for the open-graded sub-base
Before we price your permeable block drive
- Steps, thresholds and door heights
- Whether front-garden planning rules apply
- Access for a mini-digger, skip or grab lorry
- The kerb: is it already dropped, and is it wide enough?
- Where rain will go: falls, lawn, border, channel or soakaway
Do you need permission in Southall?
Southall is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Permeable paving in Southall: questions
Do you cover Greenford, Heston and Hayes?
Yes. We cover Southall and the places around it, including Greenford, Heston and Hayes, and the rest of Greater London.
Do I need planning permission for a permeable block drive in Southall?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
How much does a permeable block drive cost in Southall?
Our guide for Southall is £125–£205 per m² including VAT, so a 50 m² drive is usually about £6,300–£10,200. Your fixed price follows the survey.
Permeable paving near Southall
Nearby towns we cover for permeable paving, and permeable paving across Greater London:
- Permeable paving in Greenford
- Permeable paving in Heston
- Permeable paving in Hayes
- Permeable paving in Hounslow
- Permeable paving in Acton
- Permeable paving in Brent

