What to know before a permeable block drive in Derby
Across Derby, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.
How much does a permeable block drive cost in Derby?
Most permeable block drive quotes in the East Midlands fall within £105–£170 per m² including VAT. A 50 m² drive would usually be about £5,250–£8,500, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the East Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a permeable block drive involve?
It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.
- Ground check: how well the soil drains and how high the water table sits
- Edge restraints and any overflow or outlet the design needs
- Geotextile layer where the design needs one
- Grit laying course and permeable blocks with grit-filled joints
- Open-graded crushed stone (no fines) laid and compacted in layers
Before we price your permeable block drive
- Access for a mini-digger, skip or grab lorry
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Steps, thresholds and door heights
- Block range, thickness, colour and pattern to suit the house
- Existing manhole and inspection covers, and whether to recess them
Do you need permission in Derby?
Derby is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Permeable paving in Derby: questions
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover Belper, Ilkeston and Heanor?
Yes. We cover Derby and the places around it, including Belper, Ilkeston and Heanor, and the rest of Derbyshire.
How much does a permeable block drive cost in Derby?
Our guide for Derby is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Can you match the blocks to my house in Derby?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Permeable paving near Derby
Nearby towns we cover for permeable paving, and permeable paving across Derbyshire:
- Permeable paving in Belper
- Permeable paving in Ilkeston
- Permeable paving in Heanor
- Permeable paving in Ripley
- Permeable paving in Long Eaton
- Permeable paving in Swadlincote
