Cumbria · Permeable paving

Permeable block paving in Kendal

Planning a permeable block drive in Kendal? Start with a free survey: we check levels against the damp-proof course, the ground, the drainage and the kerb before pricing anything.

  • Postcodes LA9, LA8, LA7
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Planning a permeable block drive in Kendal

Homes in Kendal include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.

How much does a permeable block drive cost in Kendal?

Guide price in Kendal£105–£170 per m²Including VAT at 20%

For Kendal, our guide is £105–£170 per m² including VAT, so a 50 m² drive is likely to be £5,250–£8,500. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Geotextile layer where the design needs one
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Deeper dig-out for the open-graded sub-base
  • Ground check: how well the soil drains and how high the water table sits
  • Edge restraints and any overflow or outlet the design needs

Before we price your permeable block drive

  • Existing manhole and inspection covers, and whether to recess them
  • Ground conditions under the old surface and how deep the sub-base must be
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Trees and roots near the drive
  • Block range, thickness, colour and pattern to suit the house

Do you need permission in Kendal?

Kendal is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Permeable paving in Kendal: questions

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a permeable block drive in Kendal?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Do you cover Penrith and Barrow-in-Furness?

Yes. We cover Kendal and the places around it, including Penrith and Barrow-in-Furness, and the rest of Cumbria.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Permeable paving near Kendal

Nearby towns we cover for permeable paving, and permeable paving across Cumbria:

Other block paving services in Kendal

Or see all block paving services in Kendal.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Kendal, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote