County Tyrone · Permeable paving

Permeable block paving in Coalisland

If you are in Coalisland (BT71) and want a permeable block drive, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes BT71
  • £100–£160 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Planning a permeable block drive in Coalisland

Around Coalisland, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a permeable block drive cost in Coalisland?

Guide price in Coalisland£100–£160 per m²Including VAT at 20%

Guide price in Coalisland: £100–£160 per m² including VAT, which puts a 50 m² drive at about £5,000–£8,100. These are Northern Ireland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Permeable block paving driveway£100–£160 per m²
Breaking out an old surface£9.50–£40 per m²
Edging or kerb, bedded and haunched£19–£50 per metre
Typical channel drain run£330–£950
Dropped kerb (vehicle crossover) construction£950–£2,850

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

It is the straightforward way to pave a front garden without sending rain into the road, which matters because in England a non-permeable front surface over 5 m² that does not drain to a permeable area within the property needs planning permission, and in Wales any new front surface must be permeable or drain within the property. The build is different from a standard drive from the ground up, so it has to be designed as permeable rather than just using different blocks.

  • Deeper dig-out for the open-graded sub-base
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Edge restraints and any overflow or outlet the design needs
  • Geotextile layer where the design needs one
  • Grit laying course and permeable blocks with grit-filled joints

What the survey covers

  • Ground conditions under the old surface and how deep the sub-base must be
  • Existing manhole and inspection covers, and whether to recess them
  • Edges against lawns, beds, walls and neighbours
  • Trees and roots near the drive
  • The kerb: is it already dropped, and is it wide enough?

Planning and kerb rules in Coalisland

Coalisland is in Northern Ireland, so these rules apply:

In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.

Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.

Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Permeable paving in Coalisland: questions

How long does a permeable block drive take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

How much does a permeable block drive cost in Coalisland?

Our guide for Coalisland is £100–£160 per m² including VAT, so a 50 m² drive is usually about £5,000–£8,100. Your fixed price follows the survey.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Can you match the blocks to my house in Coalisland?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Permeable paving near Coalisland

Nearby towns we cover for permeable paving, and permeable paving across County Tyrone:

Other block paving services in Coalisland

Or see all block paving services in Coalisland.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Coalisland.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote