Cheshire · Permeable paving

Permeable block paving in Runcorn

If you are in Runcorn (WA7, WA6) and want a permeable block drive, we will come out, measure up and give you a fixed written price once the specification is agreed.

  • Postcodes WA7, WA6
  • £105–£170 per m² inc VAT
  • Free survey for new paving
Grey permeable block paving with grit-filled joints soaking up rain on a driveway

Permeable block paving in Runcorn: the local picture

Homes in Runcorn include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.

How much does a permeable block drive cost in Runcorn?

Guide price in Runcorn£105–£170 per m²Including VAT at 20%

In the North West, a permeable block drive usually costs £105–£170 per m² including VAT. For a 50 m² drive, that is roughly £5,250–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Permeable block paving driveway£105–£170 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.

  • Grit laying course and permeable blocks with grit-filled joints
  • Edge restraints and any overflow or outlet the design needs
  • Deeper dig-out for the open-graded sub-base
  • Open-graded crushed stone (no fines) laid and compacted in layers
  • Ground check: how well the soil drains and how high the water table sits

Before we price your permeable block drive

  • Where rain will go: falls, lawn, border, channel or soakaway
  • Access for a mini-digger, skip or grab lorry
  • Block range, thickness, colour and pattern to suit the house
  • The kerb: is it already dropped, and is it wide enough?
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)

Rules for front drives in Runcorn

Runcorn is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

Why choose Block Paving Contractors

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Permeable paving in Runcorn: questions

How much does a permeable block drive cost in Runcorn?

Our guide for Runcorn is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.

Do you cover Widnes, Warrington and Ellesmere Port?

Yes. We cover Runcorn and the places around it, including Widnes, Warrington and Ellesmere Port, and the rest of Cheshire.

Is the survey in Runcorn free?

Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Permeable paving near Runcorn

Nearby towns we cover for permeable paving, and permeable paving across Cheshire:

Other block paving services in Runcorn

Or see all block paving services in Runcorn.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote