Planning a permeable block drive in Saltcoats
In and around Saltcoats, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a permeable block drive cost in Saltcoats?
In Scotland, a permeable block drive usually costs £105–£170 per m² including VAT. For a 50 m² drive, that is roughly £5,250–£8,500. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Permeable block paving driveway | £105–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our permeable paving service
Permeable block paving is block paving built so that rainwater drains down through the joints into a deep, open-graded stone sub-base, where it is stored and soaks away slowly into the ground or is piped off. The blocks have small spacers or wider joints filled with fine grit instead of sand.
- Deeper dig-out for the open-graded sub-base
- Open-graded crushed stone (no fines) laid and compacted in layers
- Grit laying course and permeable blocks with grit-filled joints
- Edge restraints and any overflow or outlet the design needs
- Geotextile layer where the design needs one
What we check on a Saltcoats survey
- Where an electric vehicle charger cable might run
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Trees and roots near the drive
- Steps, thresholds and door heights
- Ground conditions under the old surface and how deep the sub-base must be
Do you need permission in Saltcoats?
Saltcoats is in Scotland, so these rules apply:
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Permeable paving in Saltcoats: questions
How long does a permeable block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
How much does a permeable block drive cost in Saltcoats?
Our guide for Saltcoats is £105–£170 per m² including VAT, so a 50 m² drive is usually about £5,250–£8,500. Your fixed price follows the survey.
Is the survey in Saltcoats free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
Permeable paving near Saltcoats
Nearby towns we cover for permeable paving, and permeable paving across Ayrshire:
- Permeable paving in Ardrossan
- Permeable paving in Stevenston
- Permeable paving in Kilwinning
- Permeable paving in Irvine
- Permeable paving in Troon
- Permeable paving in Kilmarnock
