North Yorkshire · Lift and re-lay

Lift and re-lay block paving in Scarborough

From the YO postcodes to North Yorkshire, we put tired block paving right without breaking out the whole drive.

  • Postcodes YO12, YO11, YO13
  • £30–£70 per m² inc VAT
  • Free survey for new paving
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

Planning a lift and re-lay job in Scarborough

In Scarborough, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.

Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.

How much does a lift and re-lay job cost in Scarborough?

Guide price in Scarborough£30–£70 per m²Including VAT at 20%

For Scarborough, our guide is £30–£70 per m² including VAT, so 30 m² re-laid is likely to be £950–£2,150. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Lift and re-lay on a sound base£30–£70 per m²
Small repair (a few blocks or a short trench)£180–£590
Sunken or rutted patch repaired£270–£1,100
Lift and re-lay with sub-base rebuilt£55–£100 per m²

Guide figures for Yorkshire and the Humber, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our lift and re-lay service

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

  • New screeded laying course
  • Lifting, cleaning and stacking
  • Survey of the blocks: thickness, damage and whether they are worth re-using
  • Sub-base repaired or rebuilt where needed
  • Jointing sand and compaction

Before we price your lift and re-lay job

  • Trees, roots and past trenches
  • How much of the area needs lifting to blend the repair
  • Whether a drain or gully is leaking under the paving
  • Condition and thickness of your existing blocks
  • What caused the dip or movement: base, laying course, edging or drains

From enquiry to finished paving

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

What you can expect from us

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Lift and re-lay in Scarborough: questions

How much does a lift and re-lay job cost in Scarborough?

Our guide is £30–£70 per m² including VAT. Small repairs are often priced from photos.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Do you cover Bridlington, Driffield and Beverley?

Yes. We cover Scarborough and the places around it, including Bridlington, Driffield and Beverley, and the rest of North Yorkshire.

Can you repair block paving in Scarborough without replacing it?

Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.

Lift and re-lay near Scarborough

Nearby towns we cover for lift and re-lay, and lift and re-lay across North Yorkshire:

Other block paving services in Scarborough

Or see all block paving services in Scarborough.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Scarborough, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote