Lift and re-lay block paving in Pyle: the local picture
Around Pyle, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a lift and re-lay job cost in Pyle?
Guide price in Pyle: £35–£75 per m² including VAT, which puts 30 m² re-laid at about £980–£2,250. These are Wales guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£75 per m² |
| Small repair (a few blocks or a short trench) | £185–£600 |
| Sunken or rutted patch repaired | £280–£1,100 |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our lift and re-lay service
It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.
- Jointing sand and compaction
- Lifting, cleaning and stacking
- Survey of the blocks: thickness, damage and whether they are worth re-using
- New screeded laying course
- Sub-base repaired or rebuilt where needed
What we look at first in Pyle
- Falls, so water does not collect again
- How much of the area needs lifting to blend the repair
- Whether a drain or gully is leaking under the paving
- Condition and thickness of your existing blocks
- Whether the edging has moved or was never set in concrete
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Lift and re-lay in Pyle: questions
Do you cover Porthcawl, Aberkenfig and Bridgend?
Yes. We cover Pyle and the places around it, including Porthcawl, Aberkenfig and Bridgend, and the rest of Mid Glamorgan.
How much does a lift and re-lay job cost in Pyle?
Our guide is £35–£75 per m² including VAT. Small repairs are often priced from photos.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
Can you repair block paving in Pyle without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Lift and re-lay near Pyle
Nearby towns we cover for lift and re-lay, and lift and re-lay across Mid Glamorgan:
- Lift and re-lay in Porthcawl
- Lift and re-lay in Aberkenfig
- Lift and re-lay in Bridgend
- Lift and re-lay in Maesteg
- Lift and re-lay in Pencoed
- Lift and re-lay in Tonyrefail
