What to know before a block paved patio in Pyle
Around Pyle, gardens are often larger, so falls, steps and where the water goes need planning.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a block paved patio cost in Pyle?
In Wales, a block paved patio usually costs £75–£130 per m² including VAT. For a 20 m² patio, that is roughly £1,700–£3,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Block paved patio (concrete block) | £75–£130 per m² |
| Breaking out an old surface | £9.50–£35 per m² |
| Edging or kerb, bedded and haunched | £19–£45 per metre |
| Step with block or brick riser and paved tread | £165–£330 per step |
| Typical channel drain run | £330–£930 |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paved patio involve?
A block paved patio is a garden seating or dining area paved with concrete or clay blocks on a compacted base. Because a patio carries people and furniture rather than cars, the sub-base is thinner than for a drive, but the falls, edging and drainage matter just as much.
- Optional sealer
- Blocks in your pattern, edges and cuts
- Layout marked out with you, including steps and doors
- Falls away from the house and doors
- Jointing sand and compaction
What we check on a Pyle survey
- Where rain will go: falls away from the house, onto lawn or borders, or into a channel
- Edges against lawns, beds, fences and walls
- Levels against the damp-proof course and door thresholds
- Trees and roots near the paving
- Ground conditions and how deep the dig must be
Do you need permission for a block paved patio in Pyle?
A patio or path behind the house does not usually need planning permission. Raised patios, listed buildings and flats can be different, so we check on the survey.
Paving in front of the house follows the front-garden rules: in Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval.
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
What you can expect from us
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Patios in Pyle: questions
Can the paving be level with the back door?
Paving normally sits at least 150 mm below the damp-proof course. A level step-out needs a drainage channel against the house and careful detailing, which we agree on the survey.
Is the survey in Pyle free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a block paved patio cost in Pyle?
Our guide for Pyle is £75–£130 per m² including VAT, so a 20 m² patio is usually about £1,700–£3,000. Your fixed price follows the survey.
Do you cover Porthcawl, Aberkenfig and Bridgend?
Yes. We cover Pyle and the places around it, including Porthcawl, Aberkenfig and Bridgend, and the rest of Mid Glamorgan.
Patios near Pyle
Nearby towns we cover for patios, and patios across Mid Glamorgan:
- Patios in Porthcawl
- Patios in Aberkenfig
- Patios in Bridgend
- Patios in Maesteg
- Patios in Pencoed
- Patios in Tonyrefail
