Lift and re-lay block paving in Wallasey: the local picture
Wallasey is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a lift and re-lay job cost in Wallasey?
Guide price in Wallasey: £35–£80 per m² including VAT, which puts 30 m² re-laid at about £1,050–£2,400. These are North West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £35–£80 per m² |
| Small repair (a few blocks or a short trench) | £200–£650 |
| Sunken or rutted patch repaired | £300–£1,200 |
| Lift and re-lay with sub-base rebuilt | £60–£110 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our lift and re-lay service
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Lifting, cleaning and stacking
- Survey of the blocks: thickness, damage and whether they are worth re-using
- Blocks relaid, new cuts made, edges re-set
- Sub-base repaired or rebuilt where needed
- Jointing sand and compaction
How we find the cause
- How much of the area needs lifting to blend the repair
- What caused the dip or movement: base, laying course, edging or drains
- Whether a drain or gully is leaking under the paving
- Replacement blocks or hidden blocks to swap in
- Condition and thickness of your existing blocks
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Lift and re-lay in Wallasey: questions
Can you repair block paving in Wallasey without replacing it?
Usually, yes. We lift the affected blocks, fix the bed or base, and re-lay the same blocks so the repair matches.
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
How much does a lift and re-lay job cost in Wallasey?
Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Lift and re-lay near Wallasey
Nearby towns we cover for lift and re-lay, and lift and re-lay across Merseyside:
- Lift and re-lay in Birkenhead
- Lift and re-lay in Bootle
- Lift and re-lay in Liverpool
- Lift and re-lay in Bebington
- Lift and re-lay in Heswall
- Lift and re-lay in Kirkby
