Planning a block paving sealing job in Wallasey
In Wallasey, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
How much does a block paving sealing job cost in Wallasey?
In the North West, a block paving sealing job usually costs £5–£15 per m² including VAT. For a 50 m² drive, that is roughly £250–£750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Second coat where the product requires it
- Sealer applied evenly by roller or low-pressure sprayer
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Check that the paving is clean, re-sanded and dry
Before we price your block paving sealing job
- Which sealer finish suits a slope or patio
- Type of block and its age
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Moss, algae, weeds and oil staining
- How much joint sand is left
What happens next
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Wallasey: questions
How much does a block paving sealing job cost in Wallasey?
Guide price for Wallasey: £5–£15 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Birkenhead, Bootle and Liverpool?
Yes. We cover Wallasey and the places around it, including Birkenhead, Bootle and Liverpool, and the rest of Merseyside.
How often should block paving in Wallasey be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Sealing near Wallasey
Nearby towns we cover for sealing, and sealing across Merseyside:
- Sealing in Birkenhead
- Sealing in Bootle
- Sealing in Liverpool
- Sealing in Bebington
- Sealing in Heswall
- Sealing in Kirkby
