Lift and re-lay block paving in Stockton-on-Tees: the local picture
Across Stockton-on-Tees, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a lift and re-lay job cost in Stockton-on-Tees?
In the North East, a lift and re-lay job usually costs £30–£70 per m² including VAT. For 30 m² re-laid, that is roughly £950–£2,150. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Lift and re-lay on a sound base | £30–£70 per m² |
| Small repair (a few blocks or a short trench) | £180–£590 |
| Sunken or rutted patch repaired | £270–£1,100 |
| Lift and re-lay with sub-base rebuilt | £55–£100 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our lift and re-lay service
Lift and re-lay means taking up an existing block paved area, cleaning and stacking the blocks, correcting the bed and the sub-base, and laying the same blocks back down. When the blocks are still sound, it fixes widespread sinking, rocking and uneven joints for less than a new drive, because the blocks themselves are re-used.
- Sub-base repaired or rebuilt where needed
- Jointing sand and compaction
- Blocks relaid, new cuts made, edges re-set
- New screeded laying course
- Survey of the blocks: thickness, damage and whether they are worth re-using
How we find the cause
- Whether a drain or gully is leaking under the paving
- Whether the edging has moved or was never set in concrete
- Replacement blocks or hidden blocks to swap in
- Condition and thickness of your existing blocks
- What caused the dip or movement: base, laying course, edging or drains
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Lift and re-lay in Stockton-on-Tees: questions
Can you send someone just to look?
For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.
How much does a lift and re-lay job cost in Stockton-on-Tees?
Our guide is £30–£70 per m² including VAT. Small repairs are often priced from photos.
Why does block paving sink?
Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.
Do you cover Billingham, Hartlepool and Darlington?
Yes. We cover Stockton-on-Tees and the places around it, including Billingham, Hartlepool and Darlington, and the rest of County Durham.
Lift and re-lay near Stockton-on-Tees
Nearby towns we cover for lift and re-lay, and lift and re-lay across County Durham:
- Lift and re-lay in Billingham
- Lift and re-lay in Hartlepool
- Lift and re-lay in Darlington
- Lift and re-lay in Newton Aycliffe
- Lift and re-lay in Peterlee
- Lift and re-lay in Bishop Auckland
