Scotland · Lift and re-lay

Lift and re-lay block paving in Argyll and Bute

Before you replace a block drive in Argyll and Bute, ask whether it can be repaired: re-levelling and re-laying often cost far less than new paving.

  • 3 towns listed
  • £35–£80 per m² inc VAT
  • By arrangement
Cleaned blocks stacked beside a screeded sand bed during a lift and re-lay

How much does a lift and re-lay job cost in Argyll and Bute?

Guide price in Argyll and Bute£35–£80 per m²Including VAT at 20%

For Argyll and Bute, our guide is £35–£80 per m² including VAT, so 30 m² re-laid is likely to be £1,050–£2,400. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Lift and re-lay on a sound base£35–£80 per m²
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for Scotland, checked 9 November 2026.

Towns we cover in Argyll and Bute

Choose a town for local prices and details for lift and re-lay:

What does a lift and re-lay job involve?

It is also the way to change a layout, add drainage or a recessed cover, or raise or lower a drive, without buying new blocks. A small allowance of new blocks is usually needed for breakages and new cuts.

Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.

  • Sub-base repaired or rebuilt where needed
  • Jointing sand and compaction
  • Blocks relaid, new cuts made, edges re-set
  • New screeded laying course
  • Survey of the blocks: thickness, damage and whether they are worth re-using

How we find the cause

  • Trees, roots and past trenches
  • Replacement blocks or hidden blocks to swap in
  • Falls, so water does not collect again
  • How much of the area needs lifting to blend the repair
  • Whether a drain or gully is leaking under the paving

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Lift and re-lay in Argyll and Bute: questions

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

How much does a lift and re-lay job cost in Argyll and Bute?

Our guide is £35–£80 per m² including VAT. Small repairs are often priced from photos.

Do you cover Helensburgh, Dunoon and Oban?

Yes. We cover all of Argyll and Bute, including Helensburgh, Dunoon and Oban.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

Neighbouring areas

Next step

Get a guide price in two minutes

Answer four quick questions for an instant guide price, then send it to us for a price from photos or a survey by arrangement. Repairs and cleaning can often be priced from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote