How much does an edging or kerb job cost in Derbyshire?
In the East Midlands, an edging or kerb job usually costs £20–£50 per metre including VAT. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Soakaway | £900–£2,000 |
| Highway authority dropped kerb application fee | £55–£500 |
Guide figures for the East Midlands, checked 9 November 2026.
Towns we cover in Derbyshire
We quote edging & kerbs in every town across Derbyshire, including:
What does an edging or kerb job involve?
The edge can be a kerb, a row of blocks laid as a soldier course, or a block on its side, but in every case it should be bedded and haunched in concrete. We also re-set failed edging on older drives, which often stops further spreading without re-laying the whole area.
Block drives laid twenty or thirty years ago are often ready for re-laying rather than replacing, because sound blocks outlast a weak base.
- New kerbs or soldier courses bedded on concrete
- Concrete haunching behind the edge
- Raised edges to beds and lawns
- Re-setting loose or missing edging on existing paving
- Steps and risers in block or kerb units
What the survey covers
- Load ratings needed for covers and gratings
- Ground conditions for any soakaway
- Who must approve the work and how long that takes
- Levels of the pavement, kerb and drive
- Access and working space
Rules for front drives in Derbyshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Edging & kerbs in Derbyshire: questions
How much does an edging or kerb job cost in Derbyshire?
Guide price: £20–£50 per metre including VAT. The survey confirms the work needed.
Who approves an edging or kerb job in Derbyshire?
For a dropped kerb, your local highway authority (usually your council). For drainage and covers on private land, no approval is usually needed, but connections to public sewers need the water company's consent.
Do you work in Derby, Chesterfield and Long Eaton?
Yes. We cover all of Derbyshire, including Derby, Chesterfield and Long Eaton.
Can this be done at the same time as a new drive in Derbyshire?
Yes, and it usually should be, so the levels match and the paving is only disturbed once.
