How much does an edging or kerb job cost in Ayrshire?
Guide price in Ayrshire: £20–£50 per metre including VAT. These are Scotland guide figures; the survey or your photos confirm the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Soakaway | £900–£2,000 |
| Highway authority dropped kerb application fee | £55–£500 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Ayrshire
We quote edging & kerbs in every town across Ayrshire, including:
What does an edging or kerb job involve?
Edging is the fixed restraint around the outside of block paving. Because the blocks are only held by friction and jointing sand, they need a firm edge on every side that is not against a wall, or they slowly move outwards, the joints open and the surface starts to dip.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
- Re-setting loose or missing edging on existing paving
- New kerbs or soldier courses bedded on concrete
- Steps and risers in block or kerb units
- Raised edges to beds and lawns
- Concrete haunching behind the edge
What the survey covers
- Access and working space
- Buried services near the crossing or channel
- Who must approve the work and how long that takes
- How the new work ties into the paving
- Levels of the pavement, kerb and drive
Rules for front drives in Ayrshire
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Edging & kerbs in Ayrshire: questions
Can this be done at the same time as a new drive in Ayrshire?
Yes, and it usually should be, so the levels match and the paving is only disturbed once.
How much does an edging or kerb job cost in Ayrshire?
Guide price: £20–£50 per metre including VAT. The survey confirms the work needed.
Do you work in Kilmarnock, Ayr and Irvine?
Yes. We cover all of Ayrshire, including Kilmarnock, Ayr and Irvine.
Who approves an edging or kerb job in Ayrshire?
For a dropped kerb, your council as roads authority. For drainage and covers on private land, no approval is usually needed, but connections to public sewers need the water company's consent.
