How much does a cobble-effect block drive cost in North Yorkshire?
Most cobble-effect block drive quotes in Yorkshire and the Humber fall within £90–£145 per m² including VAT. A 50 m² drive would usually be about £4,500–£7,200, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £90–£145 per m² |
| Breaking out an old surface | £9–£35 per m² |
| Edging or kerb, bedded and haunched | £18–£45 per metre |
| Typical channel drain run | £320–£900 |
| Dropped kerb (vehicle crossover) construction | £900–£2,700 |
Guide figures for Yorkshire and the Humber, checked 9 November 2026.
Towns we cover in North Yorkshire
We quote cobble-effect paving in every town across North Yorkshire, including:
What is included?
Tumbled block paving is concrete block that has been rumbled or treated after making so the edges are rounded and the faces look worn. Cobble-effect ranges add three or more block sizes laid in a random or coursed pattern, which gives the look of old setts without their cost or rough surface.
Sloping drives are common in parts of Yorkshire, which affects falls, steps and drainage at the bottom of the drive.
- Mixed sizes laid to a planned random or coursed pattern
- Jointing sand and compaction
- Edge cuts blended into curves and corners
- Colour and size mix chosen on the survey
- Dig-out, sub-base and edging as for any block drive
What the survey covers
- Ground conditions under the old surface and how deep the sub-base must be
- The kerb: is it already dropped, and is it wide enough?
- Trees and roots near the drive
- Steps, thresholds and door heights
- Where an electric vehicle charger cable might run
Rules for front drives in North Yorkshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Cobble-effect paving in North Yorkshire: questions
How much does a cobble-effect block drive cost in North Yorkshire?
Our guide for North Yorkshire is £90–£145 per m² including VAT, so a 50 m² drive is usually about £4,500–£7,200. Your fixed price follows the survey.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Do you cover York, Middlesbrough and Harrogate?
Yes. We cover all of North Yorkshire, including York, Middlesbrough and Harrogate.
Can you match the blocks to my house in North Yorkshire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
