How much does a cobble-effect block drive cost in Hampshire?
Most cobble-effect block drive quotes in the South East fall within £110–£175 per m² including VAT. A 50 m² drive would usually be about £5,400–£8,650, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £110–£175 per m² |
| Breaking out an old surface | £11–£45 per m² |
| Edging or kerb, bedded and haunched | £20–£55 per metre |
| Typical channel drain run | £380–£1,100 |
| Dropped kerb (vehicle crossover) construction | £1,100–£3,250 |
Guide figures for the South East, checked 9 November 2026.
Towns we cover in Hampshire
We quote cobble-effect paving in every town across Hampshire, including:
- Southampton
- Portsmouth
- Basingstoke
- Gosport
- Waterlooville
- Farnborough
- Eastleigh
- Winchester
- Havant
- Andover
- Fareham
- Aldershot
- Fleet
- Totton
- New Milton
- Bordon
- Hythe
- Yateley
What does a cobble-effect block drive involve?
The softer look suits cottages, barn conversions and curved drives, where the rounded edges hide the many cuts a curve needs. Because the blocks come in several sizes, they take longer to lay than standard blocks, and that shows in the price per square metre.
Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.
- Dig-out, sub-base and edging as for any block drive
- Jointing sand and compaction
- Colour and size mix chosen on the survey
- Mixed sizes laid to a planned random or coursed pattern
- Edge cuts blended into curves and corners
What the survey covers
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Where rain will go: falls, lawn, border, channel or soakaway
- Access for a mini-digger, skip or grab lorry
- Edges against lawns, beds, walls and neighbours
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Hampshire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Cobble-effect paving in Hampshire: questions
How long does a cobble-effect block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do you cover Southampton, Portsmouth and Basingstoke?
Yes. We cover all of Hampshire, including Southampton, Portsmouth and Basingstoke.
Is the survey in Hampshire free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a cobble-effect block drive cost in Hampshire?
Our guide for Hampshire is £110–£175 per m² including VAT, so a 50 m² drive is usually about £5,400–£8,650. Your fixed price follows the survey.
