How much does a cobble-effect block drive cost in Dundee and Angus?
In Scotland, a cobble-effect block drive usually costs £100–£160 per m² including VAT. For a 50 m² drive, that is roughly £5,000–£8,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £100–£160 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Dundee and Angus
We quote cobble-effect paving in every town across Dundee and Angus, including:
What is included?
The softer look suits cottages, barn conversions and curved drives, where the rounded edges hide the many cuts a curve needs. Because the blocks come in several sizes, they take longer to lay than standard blocks, and that shows in the price per square metre.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
- Jointing sand and compaction
- Mixed sizes laid to a planned random or coursed pattern
- Edge cuts blended into curves and corners
- Dig-out, sub-base and edging as for any block drive
- Colour and size mix chosen on the survey
What the survey covers
- Trees and roots near the drive
- Access for a mini-digger, skip or grab lorry
- Steps, thresholds and door heights
- The kerb: is it already dropped, and is it wide enough?
- Edges against lawns, beds, walls and neighbours
Rules for front drives in Dundee and Angus
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Cobble-effect paving in Dundee and Angus: questions
How long does a cobble-effect block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Do I need planning permission for a cobble-effect block drive in Dundee and Angus?
In Scotland, front paving must be porous or drain within your boundary at any size, and permitted development does not apply in conservation areas. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Can you match the blocks to my house in Dundee and Angus?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
