How much does a cobble-effect block drive cost in County Armagh?
Expect cobble-effect block drives in County Armagh to come in at around £95–£150 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £4,750 and £7,600.
| Item | Guide price inc VAT |
|---|---|
| Tumbled or cobble-effect concrete block driveway | £95–£150 per m² |
| Breaking out an old surface | £9.50–£40 per m² |
| Edging or kerb, bedded and haunched | £19–£50 per metre |
| Typical channel drain run | £330–£950 |
| Dropped kerb (vehicle crossover) construction | £950–£2,850 |
Guide figures for Northern Ireland, checked 9 November 2026.
Towns we cover in County Armagh
We quote cobble-effect paving in every town across County Armagh, including:
What is included?
Tumbled block paving is concrete block that has been rumbled or treated after making so the edges are rounded and the faces look worn. Cobble-effect ranges add three or more block sizes laid in a random or coursed pattern, which gives the look of old setts without their cost or rough surface.
Dropped kerbs in Northern Ireland go through DfI Roads, so we build that timing into the plan for new drives.
- Mixed sizes laid to a planned random or coursed pattern
- Colour and size mix chosen on the survey
- Edge cuts blended into curves and corners
- Jointing sand and compaction
- Dig-out, sub-base and edging as for any block drive
What the survey covers
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Where rain will go: falls, lawn, border, channel or soakaway
- Edges against lawns, beds, walls and neighbours
- Access for a mini-digger, skip or grab lorry
- Whether front-garden planning rules apply
Rules for front drives in County Armagh
In Northern Ireland, a hard surface between the front of the house and the road that covers or replaces more than 5 m² must be porous or permeable, or drain to a permeable area within the property, to be permitted development.
Hard surfaces within the grounds of a listed building need listed building consent. Planning is handled by your district council, so check with its planning office if you are unsure.
Dropped kerbs in Northern Ireland are approved by DfI Roads (the Department for Infrastructure), not the council; check planning separately with the council.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Cobble-effect paving in County Armagh: questions
Do you cover Craigavon, Portadown and Armagh?
Yes. We cover all of County Armagh, including Craigavon, Portadown and Armagh.
How much does a cobble-effect block drive cost in County Armagh?
Our guide for County Armagh is £95–£150 per m² including VAT, so a 50 m² drive is usually about £4,750–£7,600. Your fixed price follows the survey.
Can you match the blocks to my house in County Armagh?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How long does a cobble-effect block drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
