How much does a clay paver drive cost in Rutland?
Expect clay paver drives in Rutland to come in at around £115–£170 per m², including VAT at 20%. As an example, a 40 m² drive usually comes to between £4,600 and £6,800.
| Item | Guide price inc VAT |
|---|---|
| Clay paver driveway | £115–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the East Midlands, checked 9 November 2026.
Towns we cover in Rutland
We quote clay pavers in every town across Rutland, including:
What does a clay paver drive involve?
Clay block paving uses pavers made from fired clay rather than concrete. The colour runs right through the paver and does not fade, so a clay drive looks much the same after twenty years as it did when it was laid, and it weathers in the way a brick wall does.
Clay and mudstone ground is common in the East Midlands, so we allow for a deeper sub-base where the survey shows soft ground.
- Clay pavers laid in herringbone, basketweave or stretcher bond
- Advice on paver colour and size to suit the house
- Clean cuts with a wet saw where the pattern meets edges and covers
- Jointing sand brushed in and the surface compacted with a protective pad
- Dig-out, edging and compacted sub-base
What the survey covers
- Existing manhole and inspection covers, and whether to recess them
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Trees and roots near the drive
- Ground conditions under the old surface and how deep the sub-base must be
- Access for a mini-digger, skip or grab lorry
Rules for front drives in Rutland
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Clay pavers in Rutland: questions
Do you cover Oakham?
Yes. We cover all of Rutland, including Oakham.
How much does a clay paver drive cost in Rutland?
Our guide for Rutland is £115–£170 per m² including VAT, so a 40 m² drive is usually about £4,600–£6,800. Your fixed price follows the survey.
Do I need planning permission for a clay paver drive in Rutland?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
