How much does a clay paver drive cost in Perth and Kinross?
Expect clay paver drives in Perth and Kinross to come in at around £115–£170 per m², including VAT at 20%. As an example, a 40 m² drive usually comes to between £4,600 and £6,800.
| Item | Guide price inc VAT |
|---|---|
| Clay paver driveway | £115–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Perth and Kinross
We quote clay pavers in every town across Perth and Kinross, including:
What is included?
Clay block paving uses pavers made from fired clay rather than concrete. The colour runs right through the paver and does not fade, so a clay drive looks much the same after twenty years as it did when it was laid, and it weathers in the way a brick wall does.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Clean cuts with a wet saw where the pattern meets edges and covers
- Clay pavers laid in herringbone, basketweave or stretcher bond
- Dig-out, edging and compacted sub-base
- Jointing sand brushed in and the surface compacted with a protective pad
- Advice on paver colour and size to suit the house
What the survey covers
- Existing manhole and inspection covers, and whether to recess them
- Block range, thickness, colour and pattern to suit the house
- Where an electric vehicle charger cable might run
- Access for a mini-digger, skip or grab lorry
- Where rain will go: falls, lawn, border, channel or soakaway
Rules for front drives in Perth and Kinross
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Clay pavers in Perth and Kinross: questions
Do you cover Perth, Blairgowrie and Crieff?
Yes. We cover all of Perth and Kinross, including Perth, Blairgowrie and Crieff.
How long does a clay paver drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
What happens to my old drive?
It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.
Is the survey in Perth and Kinross free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
