How much does a clay paver drive cost in Lancashire?
Expect clay paver drives in Lancashire to come in at around £115–£170 per m², including VAT at 20%. As an example, a 40 m² drive usually comes to between £4,600 and £6,800.
| Item | Guide price inc VAT |
|---|---|
| Clay paver driveway | £115–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the North West, checked 9 November 2026.
Towns we cover in Lancashire
We quote clay pavers in every town across Lancashire, including:
- Preston
- Burnley
- Blackburn
- Blackpool
- Morecambe
- Lancaster
- Lytham St Annes
- Skelmersdale
- Leyland
- Accrington
- Chorley
- Darwen
- Thornton-Cleveleys
- Nelson, Lancashire
- Fleetwood
- Ormskirk
- Rawtenstall
- Colne
What does a clay paver drive involve?
Clay pavers are laid on the same kind of compacted sub-base and sand bed as concrete blocks, but they vary slightly more in size and are harder to cut cleanly, so laying takes longer and the cost per square metre is higher. They are a natural match for Victorian, Edwardian and Arts and Crafts houses.
Terraced streets across the North West often have very short frontages, so we check parking depth before quoting a conversion.
- Jointing sand brushed in and the surface compacted with a protective pad
- Clean cuts with a wet saw where the pattern meets edges and covers
- Clay pavers laid in herringbone, basketweave or stretcher bond
- Advice on paver colour and size to suit the house
- Dig-out, edging and compacted sub-base
What the survey covers
- Where rain will go: falls, lawn, border, channel or soakaway
- Trees and roots near the drive
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
- Whether front-garden planning rules apply
- Existing manhole and inspection covers, and whether to recess them
Rules for front drives in Lancashire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Clay pavers in Lancashire: questions
Do I need planning permission for a clay paver drive in Lancashire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
Is the survey in Lancashire free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How much does a clay paver drive cost in Lancashire?
Our guide for Lancashire is £115–£170 per m² including VAT, so a 40 m² drive is usually about £4,600–£6,800. Your fixed price follows the survey.
Do you cover Preston, Burnley and Blackburn?
Yes. We cover all of Lancashire, including Preston, Burnley and Blackburn.
