How much does a clay paver drive cost in Aberdeen and Aberdeenshire?
For Aberdeen and Aberdeenshire, our guide is £115–£170 per m² including VAT, so a 40 m² drive is likely to be £4,600–£6,800. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Clay paver driveway | £115–£170 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for Scotland, checked 9 November 2026.
Towns we cover in Aberdeen and Aberdeenshire
We quote clay pavers in every town across Aberdeen and Aberdeenshire, including:
What does a clay paver drive involve?
Clay pavers are laid on the same kind of compacted sub-base and sand bed as concrete blocks, but they vary slightly more in size and are harder to cut cleanly, so laying takes longer and the cost per square metre is higher. They are a natural match for Victorian, Edwardian and Arts and Crafts houses.
Frost and heavy rain test paving in Scotland, so a well-drained sub-base and full joints matter as much as the blocks.
- Clay pavers laid in herringbone, basketweave or stretcher bond
- Clean cuts with a wet saw where the pattern meets edges and covers
- Advice on paver colour and size to suit the house
- Jointing sand brushed in and the surface compacted with a protective pad
- Dig-out, edging and compacted sub-base
What the survey covers
- Access for a mini-digger, skip or grab lorry
- Where rain will go: falls, lawn, border, channel or soakaway
- Edges against lawns, beds, walls and neighbours
- The kerb: is it already dropped, and is it wide enough?
- Trees and roots near the drive
Rules for front drives in Aberdeen and Aberdeenshire
In Scotland, a hard surface between the house and the road is permitted development only if it is porous or drains to a permeable area within the property. There is no 5 m² threshold: the rule applies whatever the size.
Hard surfaces are not permitted development in a conservation area or within the grounds of a listed building, so planning permission is needed there.
A dropped kerb needs consent from your council as roads authority under section 56 of the Roads (Scotland) Act 1984, and planning permission may also be needed depending on the road.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Clay pavers in Aberdeen and Aberdeenshire: questions
Do you cover Aberdeen, Peterhead and Inverurie?
Yes. We cover all of Aberdeen and Aberdeenshire, including Aberdeen, Peterhead and Inverurie.
How long does a clay paver drive take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Can you match the blocks to my house in Aberdeen and Aberdeenshire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
How much does a clay paver drive cost in Aberdeen and Aberdeenshire?
Our guide for Aberdeen and Aberdeenshire is £115–£170 per m² including VAT, so a 40 m² drive is usually about £4,600–£6,800. Your fixed price follows the survey.
