Planning a block paving sealing job in Newcastle upon Tyne
Newcastle upon Tyne has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a block paving sealing job cost in Newcastle upon Tyne?
Guide price in Newcastle upon Tyne: £4.50–£14 per m² including VAT, which puts a 50 m² drive at about £225–£680. These are North East guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
What we look at first in Newcastle upon Tyne
- Which sealer finish suits a slope or patio
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- Type of block and its age
- Walls, doors and planting to protect
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Newcastle upon Tyne: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Gosforth, Felling and Wallsend?
Yes. We cover Newcastle upon Tyne and the places around it, including Gosforth, Felling and Wallsend, and the rest of Tyne and Wear.
How much does a block paving sealing job cost in Newcastle upon Tyne?
Guide price for Newcastle upon Tyne: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Newcastle upon Tyne
Nearby towns we cover for sealing, and sealing across Tyne and Wear:
- Sealing in Gosforth
- Sealing in Felling
- Sealing in Wallsend
- Sealing in Hebburn
- Sealing in Jarrow
- Sealing in Newburn
