Planning a block paving sealing job in Jarrow
Jarrow is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
Wind-driven rain on the North East coast makes falls and a well-filled joint more important.
How much does a block paving sealing job cost in Jarrow?
For Jarrow, our guide is £4.50–£14 per m² including VAT, so a 50 m² drive is likely to be £225–£680. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9 per m² |
| Clean, re-sand and seal | £7–£18 per m² |
Guide figures for the North East, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Second coat where the product requires it
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
How we find the cause
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Whether any blocks are loose or sunken first
- Type of block and its age
- Moss, algae, weeds and oil staining
- Shade and drainage, which affect regrowth
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
What you can expect from us
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sealing in Jarrow: questions
How often should block paving in Jarrow be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Jarrow?
Guide price for Jarrow: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Jarrow
Nearby towns we cover for sealing, and sealing across Tyne and Wear:
- Sealing in Hebburn
- Sealing in Wallsend
- Sealing in South Shields
- Sealing in Tynemouth
- Sealing in Felling
- Sealing in Whitley Bay
