Block paving sealing in Wellington: the local picture
Around Wellington, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Inter-war semis with narrow front gardens are common in the West Midlands, so front garden conversions and drive widenings are often the practical choice.
How much does a block paving sealing job cost in Wellington?
Guide price in Wellington: £5–£15 per m² including VAT, which puts a 50 m² drive at about £250–£750. These are West Midlands guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the West Midlands, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
What we look at first in Wellington
- Moss, algae, weeds and oil staining
- Walls, doors and planting to protect
- How much joint sand is left
- Whether any blocks are loose or sunken first
- Type of block and its age
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Sealing in Wellington: questions
How much does a block paving sealing job cost in Wellington?
Guide price for Wellington: £5–£15 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Hadley, Telford and Newport, Shropshire?
Yes. We cover Wellington and the places around it, including Hadley, Telford and Newport, Shropshire, and the rest of Shropshire.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Wellington
Nearby towns we cover for sealing, and sealing across Shropshire:
