Block paving sealing in Welshpool: what to expect
Around Welshpool, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
Wales is wetter than most of England, and new front paving has to be permeable or drain within the property, so drainage is designed in from the start.
How much does a block paving sealing job cost in Welshpool?
In Wales, a block paving sealing job usually costs £4.50–£14 per m² including VAT. For a 50 m² drive, that is roughly £235–£700. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £4.50–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£4.50 per m² |
| Clean and re-sand | £4.50–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
Before we price your block paving sealing job
- Which sealer finish suits a slope or patio
- Type of block and its age
- How much joint sand is left
- Walls, doors and planting to protect
- Whether any blocks are loose or sunken first
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Welshpool: questions
How often should block paving in Welshpool be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Welshpool?
Guide price for Welshpool: £4.50–£14 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Do you cover Newtown, Rhosllannerchrugog and Wrexham?
Yes. We cover Welshpool and the places around it, including Newtown, Rhosllannerchrugog and Wrexham, and the rest of Powys.
Sealing near Welshpool
Nearby towns we cover for sealing, and sealing across Powys:
