Block paving sealing in Bexley: the local picture
Bexley has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
Front gardens in much of London are short, so parking depth and the dropped kerb usually decide whether a drive is possible.
How much does a block paving sealing job cost in Bexley?
Guide price in Bexley: £6–£18 per m² including VAT, which puts a 50 m² drive at about £300–£900. These are London guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £6–£18 per m² |
| Jet wash clean with a rotary cleaner | £3–£6 per m² |
| Clean and re-sand | £6–£12 per m² |
| Clean, re-sand and seal | £9.50–£25 per m² |
Guide figures for London, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
What we look at first in Bexley
- Whether any blocks are loose or sunken first
- How much joint sand is left
- Walls, doors and planting to protect
- Which sealer finish suits a slope or patio
- Whether the paving is permeable (no sand, no sealing with the wrong product)
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Sealing in Bexley: questions
How much does a block paving sealing job cost in Bexley?
Guide price for Bexley: £6–£18 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Bexley be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Bexley
Nearby towns we cover for sealing, and sealing across Greater London:
- Sealing in Welling
- Sealing in Eltham
- Sealing in Thamesmead
- Sealing in Barking
- Sealing in Catford
- Sealing in Greenwich
