Block paving sealing in St Andrews: the local picture
In and around St Andrews, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in St Andrews?
Most block paving sealing job quotes in Scotland fall within £5–£15 per m² including VAT. A 50 m² drive would usually be about £250–£750, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
How we find the cause
- Type of block and its age
- How much joint sand is left
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- Walls, doors and planting to protect
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
Why choose Block Paving Contractors
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in St Andrews: questions
How much does a block paving sealing job cost in St Andrews?
Guide price for St Andrews: £5–£15 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Do you cover Cupar, Methil and Glenrothes?
Yes. We cover St Andrews and the places around it, including Cupar, Methil and Glenrothes, and the rest of Fife.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near St Andrews
Nearby towns we cover for sealing, and sealing across Fife:
