Block paving sealing in Dunbar: what to expect
Around Dunbar, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in Dunbar?
Most block paving sealing job quotes in Scotland fall within £5–£15 per m² including VAT. A 50 m² drive would usually be about £250–£750, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Sealer applied evenly by roller or low-pressure sprayer
- Drying time and a date when cars can return
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
How we find the cause
- Moss, algae, weeds and oil staining
- Whether any blocks are loose or sunken first
- How much joint sand is left
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
What happens next
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
Why choose Block Paving Contractors
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Sealing in Dunbar: questions
How often should block paving in Dunbar be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How much does a block paving sealing job cost in Dunbar?
Guide price for Dunbar: £5–£15 per m² including VAT, with a minimum charge for small areas.
Sealing near Dunbar
Nearby towns we cover for sealing, and sealing across Edinburgh and the Lothians:
- Sealing in Haddington
- Sealing in Tranent
- Sealing in Prestonpans
- Sealing in Musselburgh
- Sealing in Dalkeith
- Sealing in Bonnyrigg
