Edinburgh and the Lothians · Cleaning

Block paving cleaning in Dunbar

Tired block paving in Dunbar rarely needs replacing. A deep clean, fresh jointing sand and, if you want it, a sealer, make most drives look years younger.

  • Postcodes EH42
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Block paving cleaning in Dunbar: what to expect

Around Dunbar, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.

In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.

How much does a block paving cleaning job cost in Dunbar?

Guide price in Dunbar£2.50–£5 per m²Including VAT at 20%

Guide price in Dunbar: £2.50–£5 per m² including VAT, which puts a 50 m² drive at about £125–£250. These are Scotland guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²
Sealing only£5–£15 per m²

Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving cleaning job involve?

Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.

  • Optional biocide and sealer
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Weeds and moss removed from the joints
  • Pre-treatment where needed
  • Rinse down of edges, steps and walls

Before we price your block paving cleaning job

  • Type of block and its age
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • How much joint sand is left
  • Shade and drainage, which affect regrowth
  • Which sealer finish suits a slope or patio

How it works

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Cleaning in Dunbar: questions

How often should block paving in Dunbar be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving cleaning job cost in Dunbar?

Guide price for Dunbar: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Cleaning near Dunbar

Nearby towns we cover for cleaning, and cleaning across Edinburgh and the Lothians:

Other block paving services in Dunbar

Or see all block paving services in Dunbar.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Dunbar.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote