Devon · Sealing

Block paving sealing in Barnstaple

We quote block paving cleaning and care across Barnstaple and Devon, working from photos or a quick visit to give you a fixed price.

  • Postcodes EX31, EX32, EX33
  • £5–£15 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Planning a block paving sealing job in Barnstaple

Homes in Barnstaple include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Sloping plots are common in the South West, which affects edging, steps and where the water runs.

How much does a block paving sealing job cost in Barnstaple?

Guide price in Barnstaple£5–£15 per m²Including VAT at 20%

In the South West, a block paving sealing job usually costs £5–£15 per m² including VAT. For a 50 m² drive, that is roughly £250–£750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Sealing only£5–£15 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our sealing service

Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.

  • Second coat where the product requires it
  • Sealer applied evenly by roller or low-pressure sprayer
  • Drying time and a date when cars can return
  • Edges, walls and doors protected
  • Check that the paving is clean, re-sanded and dry

How we find the cause

  • How much joint sand is left
  • Type of block and its age
  • Walls, doors and planting to protect
  • Whether any blocks are loose or sunken first
  • Moss, algae, weeds and oil staining

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Sealing in Barnstaple: questions

How often should block paving in Barnstaple be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Do you cover Bideford, Tiverton and Exeter?

Yes. We cover Barnstaple and the places around it, including Bideford, Tiverton and Exeter, and the rest of Devon.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Sealing near Barnstaple

Nearby towns we cover for sealing, and sealing across Devon:

Other block paving services in Barnstaple

Or see all block paving services in Barnstaple.

Next step

Get a guide price in two minutes

Ready to talk about your block paving sealing job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote