Planning a block paving sealing job in Exeter
Exeter has everything from short terrace frontages to wide drives on newer estates, so the survey sets the layout and the dig.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a block paving sealing job cost in Exeter?
For Exeter, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our sealing service
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Second coat where the product requires it
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Check that the paving is clean, re-sanded and dry
Before we price your block paving sealing job
- Which sealer finish suits a slope or patio
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
- Type of block and its age
What happens next
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Sealing in Exeter: questions
Do you cover Exmouth, Tiverton and Newton Abbot?
Yes. We cover Exeter and the places around it, including Exmouth, Tiverton and Newton Abbot, and the rest of Devon.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Exeter?
Guide price for Exeter: £5–£15 per m² including VAT, with a minimum charge for small areas.
Sealing near Exeter
Nearby towns we cover for sealing, and sealing across Devon:
