Planning a block paving sealing job in Comber
Comber is a smaller town, and many of its homes have more frontage to work with than city houses, which leaves room for borders and planting.
Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.
How much does a block paving sealing job cost in Comber?
Expect block paving sealing jobs in Comber to come in at around £5–£14 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £240 and £710.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£14 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£9.50 per m² |
| Clean, re-sand and seal | £7.50–£19 per m² |
Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
Before we price your block paving sealing job
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
- Walls, doors and planting to protect
- How much joint sand is left
- Which sealer finish suits a slope or patio
From enquiry to finished paving
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
How we work
Repair before replace
If your drive can be fixed or re-laid, we will say so.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sealing in Comber: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Comber?
Guide price for Comber: £5–£14 per m² including VAT, with a minimum charge for small areas.
Do you cover Newtownards, Dundonald and Carryduff?
Yes. We cover Comber and the places around it, including Newtownards, Dundonald and Carryduff, and the rest of County Down.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Comber
Nearby towns we cover for sealing, and sealing across County Down:
- Sealing in Newtownards
- Sealing in Dundonald
- Sealing in Carryduff
- Sealing in Holywood
- Sealing in Bangor, County Down
- Sealing in Donaghadee
