County Down · Cleaning

Block paving cleaning in Comber

We clean, re-sand and seal block paving across Comber (BT23), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes BT23
  • £2.50–£5 per m² inc VAT
  • Free survey for new paving
Rotary surface cleaner cleaning a block paved drive, half clean and half stained

Planning a block paving cleaning job in Comber

Around Comber, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

Wet winters in Northern Ireland make falls, edge restraints and full joints especially important.

How much does a block paving cleaning job cost in Comber?

Guide price in Comber£2.50–£5 per m²Including VAT at 20%

Expect block paving cleaning jobs in Comber to come in at around £2.50–£5 per m², including VAT at 20%. As an example, a 50 m² drive usually comes to between £120 and £240.

ItemGuide price inc VAT
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£9.50 per m²
Clean, re-sand and seal£7.50–£19 per m²
Sealing only£5–£14 per m²

Guide figures for Northern Ireland, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Cleaning washes out some of the jointing sand, so a proper clean is followed by re-sanding with kiln-dried sand once the surface has dried. Many owners then seal the paving to lock the new sand in and keep it cleaner for longer.

  • Rinse down of edges, steps and walls
  • Kiln-dried sand brushed in once dry (re-sanding package)
  • Pre-treatment where needed
  • Weeds and moss removed from the joints
  • Rotary surface clean at a pressure that will not blow out the joints

What we look at first in Comber

  • Which sealer finish suits a slope or patio
  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Shade and drainage, which affect regrowth
  • Type of block and its age
  • Walls, doors and planting to protect

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

Why choose Block Paving Contractors

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Cleaning in Comber: questions

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How often should block paving in Comber be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

How much does a block paving cleaning job cost in Comber?

Guide price for Comber: £2.50–£5 per m² including VAT, with a minimum charge for small areas.

Cleaning near Comber

Nearby towns we cover for cleaning, and cleaning across County Down:

Other block paving services in Comber

Or see all block paving services in Comber.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Comber.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote