Cornwall · Sealing

Block paving sealing in St Austell

We clean, re-sand and seal block paving across St Austell (PL25, PL26, PL24, PL23), using a rotary cleaner at a pressure that will not damage the blocks.

  • Postcodes PL25, PL26, PL24
  • £5–£15 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Block paving sealing in St Austell: what to expect

Around St Austell, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a block paving sealing job cost in St Austell?

Guide price in St Austell£5–£15 per m²Including VAT at 20%

In the South West, a block paving sealing job usually costs £5–£15 per m² including VAT. For a 50 m² drive, that is roughly £250–£750. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.

ItemGuide price inc VAT
Sealing only£5–£15 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

Sealing block paving means applying a clear liquid sealer to clean, dry paving. A good sealer soaks into the blocks and the jointing sand, binding the sand so it does not wash out, reducing staining and making the surface easier to keep clean. Some sealers also deepen the colour or leave a light sheen.

  • Second coat where the product requires it
  • Edges, walls and doors protected
  • Drying time and a date when cars can return
  • Sealer applied evenly by roller or low-pressure sprayer
  • Check that the paving is clean, re-sanded and dry

Before we price your block paving sealing job

  • Type of block and its age
  • Which sealer finish suits a slope or patio
  • Shade and drainage, which affect regrowth
  • Whether any blocks are loose or sunken first
  • Walls, doors and planting to protect

What happens next

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Sealing in St Austell: questions

Do you cover Truro, Newquay and Falmouth?

Yes. We cover St Austell and the places around it, including Truro, Newquay and Falmouth, and the rest of Cornwall.

How often should block paving in St Austell be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

How much does a block paving sealing job cost in St Austell?

Guide price for St Austell: £5–£15 per m² including VAT, with a minimum charge for small areas.

Sealing near St Austell

Nearby towns we cover for sealing, and sealing across Cornwall:

Other block paving services in St Austell

Or see all block paving services in St Austell.

Next step

Get a guide price in two minutes

Ready to talk about your block paving sealing job? Send your postcode and a few details, and we will arrange the next step.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote