Cornwall · Sealing

Block paving sealing in Newquay

Block paving sealing in Newquay: done properly, it lifts years of moss and grime and leaves the joints full and tight.

  • Postcodes TR7, TR8, TR9
  • £5–£15 per m² inc VAT
  • Free survey for new paving
Roller applying clear sealer to a brindle block paved drive, showing a satin sheen

Block paving sealing in Newquay: what to expect

In and around Newquay, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a block paving sealing job cost in Newquay?

Guide price in Newquay£5–£15 per m²Including VAT at 20%

For Newquay, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Sealing only£5–£15 per m²
Jet wash clean with a rotary cleaner£2.50–£5 per m²
Clean and re-sand£5–£10 per m²
Clean, re-sand and seal£8–£20 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our sealing service

Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.

  • Check that the paving is clean, re-sanded and dry
  • Edges, walls and doors protected
  • Drying time and a date when cars can return
  • Sealer applied evenly by roller or low-pressure sprayer
  • Second coat where the product requires it

How we find the cause

  • Whether the paving is permeable (no sand, no sealing with the wrong product)
  • Which sealer finish suits a slope or patio
  • Whether any blocks are loose or sunken first
  • Shade and drainage, which affect regrowth
  • How much joint sand is left

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

How we work

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Sealing in Newquay: questions

Do you cover Truro, St Austell and Redruth?

Yes. We cover Newquay and the places around it, including Truro, St Austell and Redruth, and the rest of Cornwall.

How often should block paving in Newquay be cleaned?

Every two to four years for most drives, more often for shaded or north-facing paving.

Can you seal my drive straight after cleaning?

Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.

Will cleaning damage my block paving?

Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.

Sealing near Newquay

Nearby towns we cover for sealing, and sealing across Cornwall:

Other block paving services in Newquay

Or see all block paving services in Newquay.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Newquay.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote