Block paving sealing in Winsford: the local picture
Homes in Winsford include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paving sealing job cost in Winsford?
For Winsford, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Edges, walls and doors protected
- Second coat where the product requires it
- Check that the paving is clean, re-sanded and dry
- Sealer applied evenly by roller or low-pressure sprayer
Before we price your block paving sealing job
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Type of block and its age
- Moss, algae, weeds and oil staining
- How much joint sand is left
How it works
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Sealing in Winsford: questions
Do you cover Northwich, Crewe and Congleton?
Yes. We cover Winsford and the places around it, including Northwich, Crewe and Congleton, and the rest of Cheshire.
How often should block paving in Winsford be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving sealing job cost in Winsford?
Guide price for Winsford: £5–£15 per m² including VAT, with a minimum charge for small areas.
Sealing near Winsford
Nearby towns we cover for sealing, and sealing across Cheshire:
- Sealing in Northwich
- Sealing in Crewe
- Sealing in Congleton
- Sealing in Runcorn
- Sealing in Warrington
- Sealing in Widnes
