Planning a block paving cleaning job in Winsford
In Winsford, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
The North West is one of the wetter parts of England, so falls, channel drains and permeable options matter more than usual.
How much does a block paving cleaning job cost in Winsford?
Guide price in Winsford: £2.50–£5 per m² including VAT, which puts a 50 m² drive at about £125–£250. These are North West guide figures; the survey confirms the real price before you commit.
| Item | Guide price inc VAT |
|---|---|
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
| Sealing only | £5–£15 per m² |
Guide figures for the North West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our cleaning service
Block paving cleaning removes moss, algae, weeds and ground-in dirt from the surface and the joints, usually with a rotary surface cleaner on a pressure washer, which cleans evenly without the stripes a hand lance leaves. A biocide treatment can be applied to slow regrowth.
- Optional biocide and sealer
- Kiln-dried sand brushed in once dry (re-sanding package)
- Pre-treatment where needed
- Rotary surface clean at a pressure that will not blow out the joints
- Rinse down of edges, steps and walls
How we find the cause
- Whether any blocks are loose or sunken first
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- How much joint sand is left
- Which sealer finish suits a slope or patio
- Type of block and its age
From enquiry to finished paving
Quick details
Your postcode and the job. It takes a minute.
On-site check
Measurements, levels against the damp-proof course, ground and drainage.
Itemised quote
Fixed once the specification is agreed, with no vague extras.
Laid and finished
Compacted, jointed and handed back clean.
How we work
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Water planned first
Falls, channels and soakaways are designed before the pattern is chosen.
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Cleaning in Winsford: questions
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
How much does a block paving cleaning job cost in Winsford?
Guide price for Winsford: £2.50–£5 per m² including VAT, with a minimum charge for small areas.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Winsford be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Cleaning near Winsford
Nearby towns we cover for cleaning, and cleaning across Cheshire:
- Cleaning in Northwich
- Cleaning in Crewe
- Cleaning in Congleton
- Cleaning in Runcorn
- Cleaning in Warrington
- Cleaning in Widnes
