Planning a block paving sealing job in Kilmarnock
Kilmarnock is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in Kilmarnock?
For Kilmarnock, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What is included?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Check that the paving is clean, re-sanded and dry
- Second coat where the product requires it
- Drying time and a date when cars can return
- Sealer applied evenly by roller or low-pressure sprayer
- Edges, walls and doors protected
Before we price your block paving sealing job
- How much joint sand is left
- Walls, doors and planting to protect
- Type of block and its age
- Shade and drainage, which affect regrowth
- Moss, algae, weeds and oil staining
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Clean finish
The site is swept, the joints are filled and you are shown how to look after the paving.
Sealing in Kilmarnock: questions
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
How often should block paving in Kilmarnock be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
How much does a block paving sealing job cost in Kilmarnock?
Guide price for Kilmarnock: £5–£15 per m² including VAT, with a minimum charge for small areas.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Sealing near Kilmarnock
Nearby towns we cover for sealing, and sealing across Ayrshire:
- Sealing in Irvine
- Sealing in Troon
- Sealing in Kilwinning
- Sealing in Prestwick
- Sealing in Stevenston
- Sealing in Saltcoats
