Planning a block paving sealing job in Irvine
In Irvine, many front gardens have already been paved once, so new paving often starts with breaking out the old surface.
In Scotland, front paving must be porous or drain within the property whatever its size, so drainage is part of every design.
In Scotland block paving is often called monoblock; it is the same thing, and the same rules for the base, edging and drainage apply.
How much does a block paving sealing job cost in Irvine?
For Irvine, our guide is £5–£15 per m² including VAT, so a 50 m² drive is likely to be £250–£750. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.
| Item | Guide price inc VAT |
|---|---|
| Sealing only | £5–£15 per m² |
| Jet wash clean with a rotary cleaner | £2.50–£5 per m² |
| Clean and re-sand | £5–£10 per m² |
| Clean, re-sand and seal | £8–£20 per m² |
Guide figures for Scotland, checked 9 November 2026. See all prices or use the guide price tool.
What does a block paving sealing job involve?
Sealing only works on paving that has been cleaned and re-sanded first and is completely dry, so it is usually part of a clean, re-sand and seal package. It is not permanent: most sealers need renewing every three to seven years as they wear in the wheel tracks, and new paving should be left for a few months before sealing so moisture and any white efflorescence can clear.
- Drying time and a date when cars can return
- Check that the paving is clean, re-sanded and dry
- Edges, walls and doors protected
- Sealer applied evenly by roller or low-pressure sprayer
- Second coat where the product requires it
How we find the cause
- Whether the paving is permeable (no sand, no sealing with the wrong product)
- Shade and drainage, which affect regrowth
- Type of block and its age
- How much joint sand is left
- Moss, algae, weeds and oil staining
How it works
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
How we work
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Edges set in concrete
Every edge restraint is bedded and haunched, so the paving cannot creep.
Honest timescales
We tell you how long the job takes and what can delay it, such as approvals and weather.
Sealing in Irvine: questions
How often should block paving in Irvine be cleaned?
Every two to four years for most drives, more often for shaded or north-facing paving.
Do you cover Kilwinning, Stevenston and Saltcoats?
Yes. We cover Irvine and the places around it, including Kilwinning, Stevenston and Saltcoats, and the rest of Ayrshire.
Can you seal my drive straight after cleaning?
Only once it is completely dry and re-sanded. Sealing damp paving traps moisture and can leave a white bloom.
Will cleaning damage my block paving?
Not when it is done with a rotary cleaner at medium pressure and the joints are re-sanded afterwards. High-pressure lances held close are what cause damage.
Sealing near Irvine
Nearby towns we cover for sealing, and sealing across Ayrshire:
- Sealing in Kilwinning
- Sealing in Stevenston
- Sealing in Saltcoats
- Sealing in Troon
- Sealing in Kilmarnock
- Sealing in Ardrossan
