Dorset · Repairs

Block paving repairs in Poole

When a block drive in Poole or nearby Bournemouth starts to dip or rattle, the blocks are rarely the problem; the bed and base usually are.

  • Postcodes BH15, BH14, BH17
  • £200–£650 inc VAT
  • Free survey for new paving
Gloved hands lifting a cracked block out of a grey block paved driveway to replace it

Block paving repairs in Poole: the local picture

Across Poole, front gardens range from narrow terrace plots to broad modern drives, and the best block, pattern and drainage choice changes with them.

The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.

How much does a block paving repair cost in Poole?

Guide price in Poole£200–£650Including VAT at 20%

Most block paving repair quotes in the South West fall within £200–£650 including VAT, with any extras listed separately on your quote.

ItemGuide price inc VAT
Small repair (a few blocks or a short trench)£200–£650
Sunken or rutted patch repaired£300–£1,200
Lift and re-lay on a sound base£35–£80 per m²
Lift and re-lay with sub-base rebuilt£60–£110 per m²

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What does a block paving repair involve?

Most small repairs can be priced from clear photos and a measurement. If the problem is a symptom of something deeper, such as a failed edge or a soft sub-base, we will say so rather than patching over it, and price the proper fix alongside.

  • Replacement blocks matched as closely as possible, or sound blocks re-used
  • Re-jointing and compaction of the repaired area
  • Diagnosis from photos or a visit
  • Damaged blocks cut out without breaking neighbours
  • Laying course corrected and re-screeded

What we look at first in Poole

  • Whether a drain or gully is leaking under the paving
  • Replacement blocks or hidden blocks to swap in
  • Trees, roots and past trenches
  • What caused the dip or movement: base, laying course, edging or drains
  • Condition and thickness of your existing blocks

How it works

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Honest timescales

We tell you how long the job takes and what can delay it, such as approvals and weather.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repairs in Poole: questions

Do you cover Bournemouth, Ferndown and Christchurch?

Yes. We cover Poole and the places around it, including Bournemouth, Ferndown and Christchurch, and the rest of Dorset.

Why does block paving sink?

Most dips come from a thin or poorly compacted sub-base, too much sand under the blocks, failed edging, or water washing material out from a broken drain.

How much does a block paving repair cost in Poole?

Our guide is £200–£650 including VAT. Small repairs are often priced from photos.

Can you send someone just to look?

For larger or unclear problems we visit; for small repairs, clear photos with a tape measure in shot are often enough to price it.

Repairs near Poole

Nearby towns we cover for repairs, and repairs across Dorset:

Other block paving services in Poole

Or see all block paving services in Poole.

Next step

Get a guide price in two minutes

Tell us what you have in mind for Poole, and we will put a written price together.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote