How much does a block paved driveway cost in Worcestershire?
Most block paved driveway quotes in the West Midlands fall within £85–£140 per m² including VAT. A 50 m² double drive would usually be about £4,250–£7,000, with any extras listed separately on your quote.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the West Midlands, checked 9 November 2026.
Towns we cover in Worcestershire
Choose a town for local prices and details for block paved driveways:
What is included?
A block paved driveway is a surface of small concrete or clay blocks laid tightly on a bed of sharp sand, held in by a fixed edge and locked together with kiln-dried jointing sand. Laid on a properly dug and compacted sub-base, it carries cars for decades, and a single damaged block can be lifted and replaced without breaking the surface.
Clay ground is widespread in the West Midlands, so the sub-base depth and drainage are checked on every survey.
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Edge restraints or kerbs bedded and haunched in concrete
- Sharp-sand laying course screeded to falls
- Crushed-stone sub-base laid in layers and compacted
- Blocks laid in your chosen pattern, with a contrasting border if wanted
What the survey covers
- Trees and roots near the drive
- Where an electric vehicle charger cable might run
- Block range, thickness, colour and pattern to suit the house
- Where rain will go: falls, lawn, border, channel or soakaway
- Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
Rules for front drives in Worcestershire
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
How it works
Send the basics
Postcode, what you need and a rough size. Photos help.
Survey
We measure, check levels, ground and drainage, and talk through blocks and patterns.
Written quote
An itemised quote with the specification, the price and the start date.
The work
Our paving team builds it to the agreed specification and leaves the site swept.
Block paved driveways in Worcestershire: questions
Can you match the blocks to my house in Worcestershire?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Do I need planning permission for a block paved driveway in Worcestershire?
In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.
How much does a block paved driveway cost in Worcestershire?
Our guide for Worcestershire is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
