Wiltshire · Block paved driveways

Block paving driveways in Salisbury

Block paving suits homes in Salisbury because it can be repaired a block at a time and looks right for decades when the base underneath is built properly.

  • Postcodes SP1, SP2, SP5
  • £85–£140 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

What to know before a block paved driveway in Salisbury

Salisbury is a sizeable town with a mix of semis, terraces and newer estates, and many drives here were first laid decades ago.

Sloping plots are common in the South West, which affects edging, steps and where the water runs.

How much does a block paved driveway cost in Salisbury?

Guide price in Salisbury£85–£140 per m²Including VAT at 20%

Guide price in Salisbury: £85–£140 per m² including VAT, which puts a 50 m² double drive at about £4,250–£7,000. These are South West guide figures; the survey confirms the real price before you commit.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£85–£140 per m²
Breaking out an old surface£10–£40 per m²
Edging or kerb, bedded and haunched£20–£50 per metre
Typical channel drain run£350–£1,000
Dropped kerb (vehicle crossover) construction£1,000–£3,000

Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Edge restraints or kerbs bedded and haunched in concrete
  • Cuts at edges, around covers and against the house
  • Sharp-sand laying course screeded to falls
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Removal of the old surface and soil to the agreed depth, with waste taken away

What the survey covers

  • Block range, thickness, colour and pattern to suit the house
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Whether front-garden planning rules apply
  • Steps, thresholds and door heights
  • The kerb: is it already dropped, and is it wide enough?

Do you need permission in Salisbury?

Salisbury is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Send the basics

    Postcode, what you need and a rough size. Photos help.

  2. Survey

    We measure, check levels, ground and drainage, and talk through blocks and patterns.

  3. Written quote

    An itemised quote with the specification, the price and the start date.

  4. The work

    Our paving team builds it to the agreed specification and leaves the site swept.

What you can expect from us

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

One point of contact

You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.

Block paved driveways in Salisbury: questions

Can you match the blocks to my house in Salisbury?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

Do you cover Warminster and Trowbridge?

Yes. We cover Salisbury and the places around it, including Warminster and Trowbridge, and the rest of Wiltshire.

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a block paved driveway in Salisbury?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Block paved driveways near Salisbury

Nearby towns we cover for block paved driveways, and block paved driveways across Wiltshire:

Other block paving services in Salisbury

Or see all block paving services in Salisbury.

Next step

Get a guide price in two minutes

Get a guide price in a couple of minutes with our quote tool, or book a survey in Salisbury.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote