Planning a block paved driveway in Melksham
Around Melksham, plots are often larger and drives longer, so edging, falls and the route the water takes need planning.
The South West is wetter than the east of England, so falls and drainage are planned before the pattern is chosen.
How much does a block paved driveway cost in Melksham?
In the South West, a block paved driveway usually costs £85–£140 per m² including VAT. For a 50 m² double drive, that is roughly £4,250–£7,000. Your exact price depends on what the survey or your photos show, and is fixed in writing before anything is booked.
| Item | Guide price inc VAT |
|---|---|
| Concrete block driveway, new sub-base | £85–£140 per m² |
| Breaking out an old surface | £10–£40 per m² |
| Edging or kerb, bedded and haunched | £20–£50 per metre |
| Typical channel drain run | £350–£1,000 |
| Dropped kerb (vehicle crossover) construction | £1,000–£3,000 |
Guide figures for the South West, checked 9 November 2026. See all prices or use the guide price tool.
What you get with our block paved driveways service
We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.
- Removal of the old surface and soil to the agreed depth, with waste taken away
- Kiln-dried sand brushed in and the surface vibrated with a plate compactor
- Cuts at edges, around covers and against the house
- Sharp-sand laying course screeded to falls
- Survey, measurements and a written, itemised quote
Before we price your block paved driveway
- Where an electric vehicle charger cable might run
- Where rain will go: falls, lawn, border, channel or soakaway
- Whether front-garden planning rules apply
- Access for a mini-digger, skip or grab lorry
- Steps, thresholds and door heights
Do you need permission in Melksham?
Melksham is in England, so these rules apply:
In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.
Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.
A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.
General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.
From enquiry to finished paving
Tell us about the job
Use the form, the quote tool, WhatsApp or a call.
We take a look
A survey visit, or photos for smaller repair and cleaning jobs.
Price in writing
Every line itemised, including the dig, edging and drainage.
Booked and built
Agreed start date, then the work, the final clean-down and the joint top-up.
What you can expect from us
The dig and sub-base in writing
Your quote states the depth of dig, the sub-base thickness and how it is compacted.
Repair before replace
If your drive can be fixed or re-laid, we will say so.
Itemised quotes
Break-out, waste, edging, drainage and covers are separate lines you can see.
One point of contact
You deal with one team from survey to sign-off, with work carried out by paving teams working under S&K.
Block paved driveways in Melksham: questions
How much does a block paved driveway cost in Melksham?
Our guide for Melksham is £85–£140 per m² including VAT, so a 50 m² double drive is usually about £4,250–£7,000. Your fixed price follows the survey.
Can you match the blocks to my house in Melksham?
We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.
Is the survey in Melksham free?
Yes, for new paving here: the survey and written quote are free with no obligation. Repairs and cleaning are usually priced from photos, or from a short visit where needed.
How long does a block paved driveway take to build?
Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.
Block paved driveways near Melksham
Nearby towns we cover for block paved driveways, and block paved driveways across Wiltshire:
- Block paved driveways in Trowbridge
- Block paved driveways in Chippenham
- Block paved driveways in Warminster
- Block paved driveways in Swindon
