South Glamorgan · Block paved driveways

Block paving driveways in Penarth

Block paving suits homes in Penarth because it can be repaired a block at a time and looks right for decades when the base underneath is built properly.

  • Postcodes CF64
  • £80–£130 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

What to know before a block paved driveway in Penarth

In and around Penarth, village-style frontages sit alongside newer cul-de-sacs, so the right block often depends on the age of the house.

Hilly streets in much of Wales mean many drives slope, which shapes the falls, the edging and the water route.

How much does a block paved driveway cost in Penarth?

Guide price in Penarth£80–£130 per m²Including VAT at 20%

For Penarth, our guide is £80–£130 per m² including VAT, so a 50 m² double drive is likely to be £3,950–£6,500. Smaller jobs cost more per square metre because set-up and waste costs do not shrink with the area.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£80–£130 per m²
Breaking out an old surface£9.50–£35 per m²
Edging or kerb, bedded and haunched£19–£45 per metre
Typical channel drain run£330–£930
Dropped kerb (vehicle crossover) construction£930–£2,800

Guide figures for Wales, checked 9 November 2026. See all prices or use the guide price tool.

What you get with our block paved driveways service

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Sharp-sand laying course screeded to falls
  • Edge restraints or kerbs bedded and haunched in concrete
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Removal of the old surface and soil to the agreed depth, with waste taken away

What we check on a Penarth survey

  • Ground conditions under the old surface and how deep the sub-base must be
  • Where rain will go: falls, lawn, border, channel or soakaway
  • Existing manhole and inspection covers, and whether to recess them
  • Edges against lawns, beds, walls and neighbours
  • Access for a mini-digger, skip or grab lorry

Rules for front drives in Penarth

Penarth is in Wales, so these rules apply:

In Wales, any new or replacement hard surface at the front of a house should be permeable or drain to a permeable area within the property to avoid needing planning permission. Unlike England, there is no 5 m² allowance for new paving; only repairs of up to 5 m² of existing surface are exempt.

Since January 2019, construction work covering 100 m² or more with drainage implications, including drives and patios, needs approval from the local SuDS Approving Body (SAB) before work starts, even where planning permission is not needed.

A dropped kerb needs your council's approval as highway authority, and a new access onto a classified road needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

What happens next

  1. Tell us about the job

    Use the form, the quote tool, WhatsApp or a call.

  2. We take a look

    A survey visit, or photos for smaller repair and cleaning jobs.

  3. Price in writing

    Every line itemised, including the dig, edging and drainage.

  4. Booked and built

    Agreed start date, then the work, the final clean-down and the joint top-up.

How we work

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Edges set in concrete

Every edge restraint is bedded and haunched, so the paving cannot creep.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

The dig and sub-base in writing

Your quote states the depth of dig, the sub-base thickness and how it is compacted.

Block paved driveways in Penarth: questions

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a block paved driveway in Penarth?

In Wales, new front paving should be permeable or drain within your boundary to avoid planning permission, and drives of 100 m² or more need SuDS approval. Ask us on the survey if you are unsure.

Can you match the blocks to my house in Penarth?

We bring samples to the survey and suggest blocks and borders that suit the age and brick of the house. Final colour is your choice.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Block paved driveways near Penarth

Nearby towns we cover for block paved driveways, and block paved driveways across South Glamorgan:

Other block paving services in Penarth

Or see all block paving services in Penarth.

Next step

Get a guide price in two minutes

Want a number before a visit? Try the guide price tool, then book a survey to fix it.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote