Oxfordshire · Block paved driveways

Block paving driveways in Abingdon

Our block paving driveways service covers Abingdon and nearby Didcot, from first measurements to the final sweep of kiln-dried sand. You get a written, itemised quote before anything is booked.

  • Postcodes OX14, OX13
  • £90–£150 per m² inc VAT
  • Free survey for new paving
Silver-grey herringbone block paved driveway with a charcoal border in front of a detached house

Planning a block paved driveway in Abingdon

Homes in Abingdon include plenty of semis and detached houses with room for a drive, plus older terraces where parking is tighter.

Chalk, clay and sandy ground all occur across the South East, so the dig and sub-base depth are set on the survey rather than assumed.

How much does a block paved driveway cost in Abingdon?

Guide price in Abingdon£90–£150 per m²Including VAT at 20%

Expect block paved driveways in Abingdon to come in at around £90–£150 per m², including VAT at 20%. As an example, a 50 m² double drive usually comes to between £4,600 and £7,550.

ItemGuide price inc VAT
Concrete block driveway, new sub-base£90–£150 per m²
Breaking out an old surface£11–£45 per m²
Edging or kerb, bedded and haunched£20–£55 per metre
Typical channel drain run£380–£1,100
Dropped kerb (vehicle crossover) construction£1,100–£3,250

Guide figures for the South East, checked 9 November 2026. See all prices or use the guide price tool.

What is included?

We build block drives for homeowners from scratch: digging out the old surface, setting edge restraints in concrete, building and compacting the sub-base, screeding the laying course, laying the pattern, cutting in the edges and vibrating the blocks into the sand. Every quote states the depth of dig, the sub-base thickness, the edging, the falls and where the water goes.

  • Blocks laid in your chosen pattern, with a contrasting border if wanted
  • Edge restraints or kerbs bedded and haunched in concrete
  • Kiln-dried sand brushed in and the surface vibrated with a plate compactor
  • Crushed-stone sub-base laid in layers and compacted
  • Survey, measurements and a written, itemised quote

Before we price your block paved driveway

  • Whether front-garden planning rules apply
  • Steps, thresholds and door heights
  • Where an electric vehicle charger cable might run
  • Levels against the damp-proof course (the finished paving must sit at least 150 mm below it)
  • Existing manhole and inspection covers, and whether to recess them

Planning and kerb rules in Abingdon

Abingdon is in England, so these rules apply:

In England, paving in front of the house that covers more than 5 m² needs planning permission unless it is permeable or drains to a lawn, border or soakaway inside your boundary. Permeable block paving, or standard blocks laid to fall onto a planted strip, avoid the need for permission in most cases.

Flats and maisonettes, listed buildings, and homes covered by an Article 4 direction can have tighter rules, and conservation areas, National Parks and National Landscapes restrict some permitted development.

A dropped kerb needs your local highway authority's approval (usually the county, unitary, metropolitan or London borough council), and a new access onto an A, B or C classified road also needs planning permission.

General guidance, not legal advice. Your survey confirms what applies to your home. See the planning guide.

From enquiry to finished paving

  1. Quick details

    Your postcode and the job. It takes a minute.

  2. On-site check

    Measurements, levels against the damp-proof course, ground and drainage.

  3. Itemised quote

    Fixed once the specification is agreed, with no vague extras.

  4. Laid and finished

    Compacted, jointed and handed back clean.

Why choose Block Paving Contractors

Itemised quotes

Break-out, waste, edging, drainage and covers are separate lines you can see.

Repair before replace

If your drive can be fixed or re-laid, we will say so.

Clean finish

The site is swept, the joints are filled and you are shown how to look after the paving.

Water planned first

Falls, channels and soakaways are designed before the pattern is chosen.

Block paved driveways in Abingdon: questions

How long does a block paved driveway take to build?

Most homes take between three and seven working days, depending on size, the dig and the drainage. Your quote gives the expected duration.

Do I need planning permission for a block paved driveway in Abingdon?

In England, a front drive over 5 m² needs planning permission unless it is permeable or drains to a lawn or border within your boundary. Ask us on the survey if you are unsure.

Do you cover Didcot, Oxford and Witney?

Yes. We cover Abingdon and the places around it, including Didcot, Oxford and Witney, and the rest of Oxfordshire.

What happens to my old drive?

It is broken out and taken away by skip or grab lorry, listed as its own line on your quote.

Block paved driveways near Abingdon

Nearby towns we cover for block paved driveways, and block paved driveways across Oxfordshire:

Other block paving services in Abingdon

Or see all block paving services in Abingdon.

Next step

Get a guide price in two minutes

Call, WhatsApp or use the form, and we will come back to you to arrange a visit or a price from photos.

Hands laying charcoal paving blocks in herringbone on a sand bed
CallGet a quote